Hotter Spark for more power and efficient fuel management. Allows for a wider spark. PLEASE NOTE: YOU MUST RUN EXTERNAL COIL WITH THIS DISTRIBUTOR and. Coil needs to be 12V and have an output of 40,000 volts or more.
This Small Cap HEI Ready-To-Run distributor is made for easy installation. Just hook up the three wires and you are "Ready-To-Run"!! This listing also includes a New.12 Volt coil that puts out 45,000 volts. This coil has the classic "old Skool" look and is oil-filled.
This is a perfect coil to run with this electronic distributor. These wires have a straight spark plug boot which is popular for the Cadillac 472 & 500. Also these grey spark plug boots are high temp boots that can withstand 50 degrees more heat than a standard spark plug boot. These wires are made in the USA by PACKARD WIRE CO and are 8mm High Performance, 270 ohm/foot, Spiral Core Spark plug wires. These wires are already factory assembled on both ends so you do NOT need to cut to length.
Although 3 coil wires are shown in the photo, only one is included. Please let us know which coil wire you want. If a coil wire is not selected, the coil wire with the two female ends will be included.
For over 100 years, MADE IN THE USA!! These High Performance wires only have 270 ohms per foot!!
The less Ohms, the more Performance. PACKARD WIRE 8mm High Performance Spiral Core Spark Plug Wires have a resistance of ONLY 270 Ohms per foot. Next, choose a topic from the list provided. Some common questions and answers may be shown. We are a family business and your satisfaction is critical to our success.
Your questions are answered by owners of the company. All descriptions are provided accurately to the best of our knowledge. While all care is taken, any errors or omissions in the item details are unintentional. We are not mechanics but will assist you to the best of our abilities (or forward you to one of our support representatives). We cannot mark merchandise values below value or mark items as'gifts' - US and International Government regulations prohibit such behavior.
Any product which has been altered in any way, improperly installed, or not used for its intended purpose. Any costs associated with the repair or replacement of the product including labor, installation or other costs incurred by the purchaser, and in particular, any costs relating to the removal or replacement of any product that is affixed to another devise. Any damage to the product due to external causes, including accident, problems with electrical power, abnormal electrical, mechanical or environmental conditions, usage not in accordance with product instructions, misuse, neglect, alteration, repair, improper installation or improper testing. THOUSANDS OF POSITIVE FEEDBACKS (100%) since March 2000!